Skip to content
034 Motorsport - Control Arm Kit, Street Density, Audi B6/B7 A4/S4/RS4 - 034-401-1004

034 Motorsport - Control Arm Kit, Street Density, Audi B6/B7 A4/S4/RS4 - 034-401-1004

$1,180.00

Product availability: 

  • Not currently in stock. Backorders only available.

    034 Motorsport - Control Arm Kit, Street Density, Audi B6/B7 A4/S4/RS4 - 034-401-1004

    Full replacement control arm kit for A4/S4/RS4 B6 & B7 Audi vehicles. Improve performance and save from factory replacement which will fail again!

    • considerably less cost than OEM replacement
    • stiffer durometer rubber
    • higher performance
    • much longer life

    Does your Audi B6/B7 A4/S4/RS4 have that "not so fresh" feeling?  Does it clunk and clack over driveways and speed bumps? Your undercarriage just needs a little work, this is a common problem with all Audi B6/B7 chassis cars.

    Fix it once and for all with a complete Density Line Control Arm Kit from 034 Motorsport.  No, these are not parts for 7 cars, which is how it may appear; your car really uses this many links to create the sharp handling and buttery smooth ride you're used to. Just make sure they are tight for slop free, fresh handling.

    Save a ton of money by buying the complete kit instead of piecing together parts. Our control arms exceed the factory arm quality. We went to an OE supplier for Audi and had them make arms for us to our specifications. Density Line bushings feature slightly stiffer durometer rubber for crisper handling and longer life.  We go direct to the source for an improved product, by cutting out several middle men, we an offer you a higher quality part at an exceptional savings.

    Don't be fooled by cheap imitations! Our 034Motorsport Density Line Control Arm Kits are the real deal, and we stand behind them with a 1-year replacement warranty from the time of purchase!*

    NOTE 1: Hardware kit with all new nuts and bolts is now included. Only what is pictured is supplied, only "stressed must replace" hardware is included with this kit. New hardware for the sway bar end links is not supplied in this kit.

    NOTE 2: To ensure a long life for these control arms, when they are installed, it is IMPERATIVE that the suspension be compressed to static ride height before any suspension pivot bushings are tightened.  If this is not done, bushings will tear as the twisting forces on them will be much higher than is intended.  If you have any questions about this, please contact us to verify, if this is not done any warranty will be voided.

    Please Note: We highly recommend using our upgraded B5/B6/B7/C5 Audi Heavy Duty Tie Rod End when installing this kit. 

    SKU: 034-401-1004