034 - X34 Carbon Fibre Full Intake System - Audi B9 S4/S5 3.0 TFSI - 034-108-1029
- This product is on backorder and ships from a local Australian warehouse.
- Shipping time is approximately in 4-6 weeks . Transit time is usually 2-3 days.
- Ships via AUSPOST Express or Couriers Please Express.
034 Motorsport Australia - X34 Carbon Fibre Full Intake System - Audi B9 S4/S5 3.0 TFSI
Unlock real performance gains in your B9 Audi S4/S5 with the 034Motorsport X34 Carbon Fibre Full Intake System — a premium, CFD-engineered induction upgrade delivering increased power, reduced pressure drop, and sharper throttle response, all while enhancing your engine bay with stunning carbon fibre.
Extensive development, modelling, dyno testing, and road validation resulted in an intake that flows significantly better than the restrictive OEM airbox. The partially-enclosed carbon airbox uses the factory cold-air feed and integrates seamlessly with the OEM heat shielding. A massive 5” conical filter and large-diameter carbon inlet tube ensure optimal airflow on both stock and tuned vehicles.

Throughout the development process, multiple designs were modelled, prototyped, and tested - all to ensure that the X34 Carbon Fibre Full Intake System delivers measurable performance benefits and superb fitment. The result is a partially-enclosed airbox which uses the factory fresh air inlet duct and heat shield, while housing a massive 5" inlet conical air filter, and a matching CFD-optimized carbon fibre filter tube.
X34 Carbon Fibre Full Intake System Features
- Developed In-House by 034Motorsport's Engineering Team
- Fits Both Left and Right Hand Drive Configurations
- High-Quality Carbon Fibre Air Duct, Airbox, and Filter Tube Construction
- High-Gloss Epoxy Finish
- OEM+ Fit and Finish
- Dyno-Proven Horsepower Torque Gains
- Improved Airflow from Factory Airbox and Intake Tube
- Enhanced Engine Induction Sounds
- Improved Throttle Response
- Massive 5" Inlet Conical Pleated Cotton Air Filter
- Large-Diameter CFD-Optimized Carbon Fibre Filter Tube
- Reduced Intake Air Temperature
- Securely Installs Using Factory Mounting Grommets
- Simple, Straightforward Installation Instructions
Proven Performance Gains
The X34 Carbon Fibre Full Intake System for B9 Audi S4/S5 was engineered with performance in mind, and is a free-flowing replacement for the factory airbox and turbocharger inlet hose. As the development of this intake progressed, the X34 Carbon Fibre Full Intake System yielded measurable reduction in pressure drop at the turbo inlet compared to the factory airbox, with a corresponding increase in horsepower and torque throughout the powerband.
Peak Horsepower and Torque
- Stock Intake: 401 Horsepower / 424 Foot-Pounds of Torque
- X34 Intake: 412 Horsepower / 425 Foot-Pounds of Torque
Peak Gains in Horsepower and Torque
- Peak Horsepower Gain: 19 HP @ 4,950 RPM
- Peak Torque Gain: 20 FT-LBS @ 4,950 RPM
Pressure Drop Reduction
- Stock Intake: Peak Pressure Drop of 2.22 PSI at 6,500 RPM
- X34 Intake: Peak Pressure Drop of 1.64 PSI at 6,500 RPM
X34 Carbon Fibre Full Intake System Performance Data
| Factory B9 | X34 | |
|---|---|---|
| Peak Horsepower | 401 HP | 412 HP |
| Peak Torque | 424 FT-LBS | 425FT-LBS |
| Peak Horsepower Gains | 19 HP @ 4,950 RPM | |
| Peak Torque Gains | 20 FT-LBS @ 4,950 RPM | |
| Peak Pressure Drop at Turbo Inlet | 2.22 PSI | 1.64 PSI |
| Peak Pressure Drop Reduction | 0.58 PSI @ 6,500 RPM |
What's Included
- X34 Carbon Fiber Intake Air Duct
- X34 Carbon Fiber Air Box
- X34 Carbon Fiber Inlet Pipe
- X34 Silicone Hump Hose 2.75"
- 034Motorsport 5" Inlet Air Filter
- Authentic 034 X34 Hologram Decals
- Button-Head Cap Screws M5 x 0.8 x 25mm (x3)
- Button-Head Cap Screws M5 x 0.8 x 50mm (x2)
- Nylon Locking Nuts M5 x 0.8 (x3)
- Worm Drive Hose Clamps M60x80 (x2)
Vehicle Fitment
| Make | Model | Years | Chassis | Engine |
|---|---|---|---|---|
| Audi | S4 | 2018–Present | B9/B9.5 | 3.0 TFSI |
| Audi | S5 | 2018–Present | B9/B9.5 | 3.0 TFSI |
Installation Notes
• Direct bolt-on upgrade
• Fits both LHD & RHD configurations
• Uses factory cold-air duct & mount points
• Installation time: 30–60 minutes
• Professional installation recommended
Service Notes
• Ideal for both stock and tuned vehicles
• Clean or replace filter every 15,000–20,000 km
• Check clamps and fasteners during routine service
Disclaimer
• Confirm vehicle model, engine type and year before purchase
• Fitment may vary on modified or region-specific vehicles
• Always consult a licensed mechanic for installation
• For fitment confirmation or assistance, contact info@vaggarage.com.au
SKU: 034-108-1029