ECS Tuning - MK6 GTI High Flow Intercooler Charge Pipe Kit

 The factory TSI plastic charge pipes and rubber couplers were never designed to handle the stress and abuse of higher boost levels much beyond stock. When combined with power-robbing abrupt and sharp bends, inferior rubber material, and small diameter tubing, it's easy to see why your intercooler pipes and couplers should be replaced, even on stock vehicles. 

At ECS Tuning, we're proud to release our in house engineered High Flow Intercooler Charge Pipe Kit! Each kit comes standard with mandrel bent, wrinkle black powdercoated aluminum intercooler pipes, smooth flowing silicone couplers, MAP sensor hardware, stainless steel T-Bolt clamps, CNC-machined 6061-T6 aluminum charge pipe adapters and new OEM O-rings for an easy, direct bolt on. 

Capable of withstanding greater heat and higher boost pressure than stock, you can expect to achieve greater reliability, less turbulence and less restriction thanks to the larger diameter tubing and smooth silicone bends. Never worry about blowing couplers off of our tubes, as each tube is bead rolled and secured with stainless T-bolt clamps over our 4-ply reinforced silicone couplers.

Designed with a focus on improving performance all while maintaining OEM fitment with the use of quality parts, our engineers were able to design our kit to function and perform better than any other available kit on the market. Attention to detail is never missed here at ECS Tuning, and this kit is no exception. 

This kit includes the following:

High Flow Turbo Outlet Pipe Kit

CNC Aluminum Turbo Outlet Adapter & Seal

Silicone Turbo Outlet Coupler

2.50" Side Pipe Intercooler Tube

Silicone Intercooler Inlet Coupler

CNC Aluminum Intercooler Inlet Adapter & Seal (for Gen1 TSI Engines w/ Clip Style Adapter) 

Stainless Steel T-bolt Clamps

 High Flow Throttle Pipe Kit

CNC Aluminum Intercooler Outlet Adapter & Seal (for Gen1 TSI Engines w/ Clip Style Adapter) 

Silicone Intercooler Outlet Coupler

2.50" Throttle Pipe Intercooler Tube w/ MAP sensor hardware

Silicone Throttle Body Hose

Stainless Steel T-bolt Clamps

Key Features:

Reduces turbulence and increases air flow capacity

Gain up to 18 WHP & 19 FT-lbs of torque with APR stage 1 software, ECS 3.0" turboback exhaust and ECS induction system

Mandrel bent and bead rolled aluminum tubing, powder coated in tough wrinkle black finish

OEM like brackets secure our tubes in place, just as the OEM units were

Replaces all rubber hoses with 4-ply silicone upgrades

CNC machined MAP flange welded to factory position 

Eliminates Noise Pipe

Easy, direct replacement upgraded part

Installation PDF available 

**Fits 2.50" intercooler inlet / outlet in OE locations

Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.